13
Use
:
Sawing of any kind of tile, up to 27" (685mm)
diagonal on 18" x 18" (450 x 450 mm) tile.
Tools:
Rip Guide comes standard on all tile saws. See
Tile Cutting Accessories
on page 15.
(For information or availability of other accessories
contact your Felker supplier.)
Blade Capacity
: Rim Ø 10" (254mm) - bore 5/8" (15,9mm).
Profile Wheel
: Rim Ø 7" (180mm) - bore 5/8" (15,9mm).
Blade Rotation
: Counter-Clockwise (CCW).
Depth of Cut
: 3-3/4" (95mm) with 10" (254mm) blade.
Horsepower:
1-1/2
1-1/2
2
Voltage:
115
115/230
240
F.L. Amperages:
14.6
17.2/8.6
12
Blade Shaft RPM:
2760
3880
2850
Weight:
lb. (kg.)
150 (68.2) 154 (70)
171 (77.7)
Dimensions - L x W x H: in
51-1/4" x 25-3/4" x 19-3/4"
(cm)
(130 x 65 x 50)
Conveyor Cart -
with special rubberized surface.
L x W: in (mm)
10-1/4" x 16" (260 x 406)
Pan Holding Capacity
: 12 gallons (46.1 liters)
Water Pump Output
: 100 gal/hr. (378 l /hr.)
These signs will give
advice for your safety
Before leaving our factory every machine is
thoroughly tested.
Follow our instructions strictly and your machine will
give you long service in normal operating conditions.
MANDATORY
INDICATION
I N F O R M AT I O N
INSTRUCTION
WARNING
PROHIBITION
Any persons not involved in the work should
leave the area.
Use only blades marked with a maximum
operating speed greater than the blade shaft
speed.
•
The new, improved blade guard offers simplified blade
installation and removal - maximum 10" (254mm) blade
capacity. The external water tube assembly is removable
for easy maintenance.
•
1-1/2 HP, High Torque (HT) 115V/60/1 motor on
standard saw.
•
The dependable, high volume, submersible coolant
pump features a screened intake.
•
The motor and pump power cords are securely mounted
directly into the Motor Housing (K).
•
The removable Drain Plug (O) at the back end of the
pan permits easy coolant draining and quick sludge
clean out. The Water Pan (3) is removable for easy
cleaning.
•
The free-rolling Conveyor Carts (4) are aligned for
straight, smooth cuts. The Back Stop with ruler allows
fast mounting and adjustment of the rip fence and
optional accessories.
•
Full-size belt shield and belt protection.
•
The special, rubberized surface coating extends cart
life and aids in control of work.
•
Makes 25" diagonal cuts on 18" x 18" (450 x 450 mm)
tile.
•
The adjustable pan allows the operator to cut tile
comfortably with a full view and control of work with
minimum stretching.
(See Figure 1)
•
Remove all items from the shipping carton and identify:
1.
Cutting Head Assembly: Includes Water Tube
Assembly (H)
2.
Frame Assembly
3.
Water Pan Assembly
4.
Conveyor Cart Assembly Carton {Cart Assembly
(4) and Rip Guide (P)}
5.
Water Pump and Accessory Carton: Includes tile
markers, Water Pump (E), Hose Barb (F), Water
Valve (G), 15/16" Wrench (N), Drain Plug (O),
two Bearing Caps (B) and fasteners: [four each
of 5/16" flatwashers and fiber locknuts], Locking
Knob (C) and a 5/16" flatwasher.
6.
Literature Assembly Envelope
NOTE:
Check the carton and all packing filler for loose parts
and optional accessories (if ordered).
•
Set the Frame Assembly (2) on a flat surface or on a
FELKER ®
folding stand.
Before starting up the machine, make sure you
read this entire manual and are familiar with
the operation of this machine.
The working area must be completely clear, well
lit and all safety hazards removed.
The operator must wear
protective clothing
appropriate to the work he is
doing.
2
BENEFITS
3
MACHINE SET-UP PROCEDURE
1
FEATURES
Summary of Contents for TILE MASTER XL TM1-XLHT
