Felker TILE MASTER XL TM1-XLHT, Operating Instructions And Parts List Manual

17

We carry out all repairs in the shortest possible time and at
the most economical prices.  (See front page for address
and phone numbers)  Contact your authorized 

FELKER®

dealer concerning maintenance and repairs.

For quick supply of spare parts and to avoid any lost time, it
is essential to quote the data on the manufacturers plate
fixed to the machine and the part number(s) and description
to be replaced with every order.

  ANGLE GUIDE

 PROTRACTOR            PRECISION MITERING GUIDE

BULLNOSE        FOLDING STAND

RIP GUIDE: P/N 051000

 - The Rip Guide is a standard

accessory supplied with every tile saw.  It is used to provide
a repeatable position for rip cuts until relocated.  The Rip
Guide clamps to the machined backstop of the conveyor cart.

ADJUSTABLE PROTRACTOR:  P/N 051010

   - The Protractor

can be used to rip cut known angles.  The protractor clamps to
the backstop.

ANGLE GUIDE

 : 

P/N 051020  - 

 This is a non-adjustable

miter used to quickly position the tile at 45 degrees; either on
the left or right side.  It is often used for repeated diagonal rip
cuts.  The Angle Guide clamps to the backstop.

BULLNOSE MITERING GUIDE

: 

P/N 051030 

 -  This is a

fixed guide that positions the tile for a 45 degree miter cut.
The Mitering Guide clamps to the backstop.

PRECISION MITERING JIG

: 

P/N 161480 - 

This is a 45 degree

fixture that has an adjustable clamp to hold the tile while miter
cutting.  The Mitering Guide clamps to the backstop.

BOOMERANGLE

: 

 P/N 169525 

 - This plastic accessory

holds the tile at 45 degrees; locating two edges of the tile.
Useful for diagonal cuts or uniformly cutting off corners.  The
Boomerangle clamps to the backstop with two thumb screws.

FOLDING STAND

:  

P/N 051041 

-  This stable, one piece

stand brings a 

FELKER®

 tile saw to standing level for ease

of work.  The stand conveniently folds flat for storage and
transporting.

The instructions for use and spare parts found in this

document are for information only and are not binding.

As part of our product quality improvement policy, we

reserve the right to make any and all technical

modifications without prior notice.

The manufacturer accepts no

responsibility caused by unsuitable

use or modifications.

Parts List:

Diag.

Part No.

Qty.

Description

Diag. Part No.

Qty.

Description

1

161479

1

Frame, Miter

10

————

1

Protractor Arm

2

050107

1

Bar, Locking

11

020011

1

Bolt, Carriage, 1/4-20 x 5/8”

3

050105

1

Clip, Stop

12

020244

1

Wing Nut, 1/4-20

4

050106

1

Spring

13

020598

1

Screw, Thumb, 1/4-20 x 1”

5

050103

1

Knob

14

051010

1

Protractor Assy

6

020598

2

Screw, Thumb, 1/4" - 20 x 1"

15

020598

1

Screw, Thumb, 1/4" - 20 x 1"

7

051020

1

Miter Assy, 45

°

16

051030

1

Holder Assy, Bullnose

8

020598

1

Screw, Thumb, 1/4" - 20 x 1"

17

051041

1

Stand, Tile Saw

9

————

1

Protractor Head

18

050102

1

Support Assy, Miter Frame

11

REPAIRS

13

TILE CUTTING ACCESSORIES

12

SPARE PARTS