FELLER ENGINEERING SS 242, Manual

 BEFORE FIRST USE

1. 

1. Remove any sticker, protective foil or storage cover from the soleplate.

2. 

2. Heat up the iron to maximum temperature and iron over a piece of 
damp cloth for several minutes for the purpose of removing any residue 
on the soleplate according to the section of “Steam ironing”.

NOTE

: It is normal that strange odor comes out from the unit for the first use. 

This will cease after a short while.

NOTE

: Some particles may come out of the soleplate when you use the iron 

for the first time. This is normal; the particles are harmless and stop coming 
out of the iron after a short while.

Descaling indicator

If the descaling indicator illuminating, it indicates the steam generator shall 

be cleaned by virtue of the mineral deposits collecting to a degree. When 

the system ensures the mineral deposits have been removed, the indicator 

will be extinguished.

Water tank

The water tank has two chambers, one chamber is used for storing water 

for ironing as normal water tank; the other chamber is used for collecting 

drainage during automatically cleaning.

Iron release button

The iron can be tightly secured onto the thermal insulation cushion by the 

iron release button. After the iron is secured, the whole steam station iron 

can be lifted up by grasping the iron’s handle. To remove the iron, just need 

to press down the iron release button.

Cord clamp

When not in use, the steam supply hose and power cord shall be stored. Pull 

out the cord clamp first, after winding the cord around the cord winding 

groove, push the cord clamp back.

6