AIR PURIFIER SET-UP
DISPLAY PANEL
1. AeraSmart™ SENSOR -
Monitors the air quality and
automatically adjusts the fan speed to keep your air purified.
Blue, amber and red lights indicate the purity of your air.
The
unit is set to default to automatic operation when it is first
turned on. If in manual operation, go back to auto at any time
by pressing the auto icon.
2. Aera+™ MODE -
Designed for peak allergy season conditions.
Increases air turnover rate by 50% versus low fan setting mode
to remove even more allergens from your air. Switch to Aera+™
mode by pressing the
icon. To return to auto operation,
press the
icon once more to turn off.
3. FAN SPEED INDICATOR -
Shows current fan speed setting:
low, medium, high or turbo speed.
4. MANUAL FAN SPEED ADJUSTMENT -
Tap fan icon to
manually select fan speed.
5. TRUE HEPA FILTER CHANGE INDICATOR -
Amber and
red lights indicate when to replace filter. The red indicator light
will signal when to replace filter. (Recommended to replace
filter every twelve months under normal usage conditions.) For
replacement filters, see page 4.
6. CARBON FILTER CHANGE INDICATOR -
Amber and red
lights indicate when to replace filter. The red indicator light
will signal when to replace filter. (Recommended to replace
filter every three months under normal usage conditions.) For
replacement filters, see page 4.
7. PlasmaTRUE™ TECHNOLOGY -
Creates an ionized field to
help safely remove airborne pollutants.
4
1
3
7
6
5
2
NOTE:
Follow these instructions for
best results.
• Place unit at least 2 feet (½ meter) from
the wall.
• Keep unit away from drafty areas.
• Keep curtains away from unit, as they
may interfere with air intake/outlet.
• Place unit on a stable surface with plenty
of air circulation.
1. Remove protective film from the
control panel.
2. Pull out drawer.
3. Remove bag from
filters drawer.
4. Insert Carbon Filter first and then True
HEPA Filter.
5. Fully insert drawer into unit until click
is heard.
6. Plug in the power cord to a wall outlet.
7. Turn unit on. Unit will beep.
8. Adjust louvers to direct air flow.
For approximately the first 4
minutes after turning the unit on,
the auto icon will flash while the unit
measures air quality.
6
7
AeraMax-290_870328_RevB_3L_032117.indd 6-7
4/21/17 10:00 AM
