CARE AND MAINTENANCE
WARNING:
Before replacing any
filters, make sure to remove the
power plug from the wall outlet.
OPERATION
LOW
MEDIUM
HIGH
AUTOMATIC OPERATION
The unit is set to default to automatic
operation when it is first turned on. The air
purifier will automatically sense the amount
of impurities in the air, and adjust the fan
speed to keep your air purified.
MANUAL OPERATION
After you turn on the unit, you can switch to
manual operation by tapping the fan icon to
manually select the fan speed.
•
LOW, MEDIUM, OR HIGH SETTINGS
AeraSmart™ SENSOR
Air quality indicator shows levels of air
quality.
Aera+™ MODE
After you turn on the unit, you can
switch to Aera+™ mode by pressing the
Aera+™ mode icon (
). To go back
to auto operation, press Aera+™ mode
icon (
) to turn off.
Blue level indicates air is clean.
Amber level indicates air quality is poor.
Red level indicates high level of pollutants
in the air.
CLEANING
• Clean unit as necessary by wiping with a
dry, soft cloth; for stubborn stains, use a
warm, damp cloth.
• Do not use volatile fluids such as
benzene, paint thinner, or scouring
powder, as they may damage the
unit surface.
• Keep the unit dry.
Filter Replacement
The replacement filter indicators will signal
when to replace the True HEPA Filter and/
or Carbon Filter. The replacement period
will vary depending on the hours of use and
air quality. However, under normal usage,
most True HEPA Filters need to be replaced
annually, and Carbon Filters every three
months.
Do not wash and reuse the True HEPA
or Carbon Filters—they will not work
effectively. Only use Fellowes brand
AeraMax™ replacement filters.
Replacement Procedure
1. Compress tab and pull out back panel.
2. Pull out the filters that need to be
changed.
3. Remove any packaging wrap from the
new filter(s).
For replacement filter part numbers,
see page 4.
8
9
8
AeraMax-DX5_870323_RevB_3L_032117.indd 8-9
4/21/17 10:07 AM
