IMPORTANT SAFEGUARDS
¥ NEVER insert hands or fingers into paper entry as
serious personal injury may result.
¥ THIS MACHINE IS NOT A TOY. Keep children and
pets away from shredder AT ALL TIMES as serious
injury may result. Always unplug shredder when not
in use.
¥ Keep loose objects (jewelry, ties, long hair) away
from shredder. These items and others like them
may cause serious injury if they accidentally fall into
the paper entry.
¥ Confetti cut shredders contain sharp edges on the
underside of the machine. Use caution when posi-
tioning the shredder head onto the basket.
¥ Do not exceed recommended sheet capacity.
¥ Do not shred plastic, continuous forms, adhesive
labels, transparencies, glossy paper, newsprint, or
cardboard.
¥ This personal shredder is intended for paper only.
Do not attempt to shred paper clips or other hard
materials (except staples).
¥ Do not place shredder near or over a heat source or
water.
¥ Always turn off and unplug unit before moving or
cleaning and when not in use.
¥ Do not insert aerosol cleaners into or around the
shredder. Some agents may combust, causing seri-
ous injury.
¥ Never use flammable synthetic oil, petroleum- based
or aerosol lubricants to oil the cutting blades. Some
agents may combust, causing serious injury.
Use
only a recommended oil in a non-aerosol con-
tainer.
See "MAINTENANCE."
¥ Do not use this product if it or the cord has been
damaged in any way.
¥ Do not open the cover for any reason. Doing so can
expose you to dangerous voltages and will void your
warranty.
Power Cord Care
¥ Place power cord in an easily accessible position,
because it is the main disconnect switch.
¥ Do not place machine where adults, children or ani-
mals may walk on the cord.
¥ Do not rest anything on the power cord.
¥ If an extension cord is used, be sure that all prod-
ucts plugged into the extension cord do not exceed
the extension cord ampere rating.
PARTS OF THE SHREDDER
ASSEMBLY
NOTE:
This shredder will operate only when used with
the supplied basket. The supplied basket has a built-in
safety feature which prevents the shredder from oper-
ating if used with any other basket or if improperly
assembled.
To assemble shredder:
This shredder contains sharp edges
on the underside of the shredder
head. Use caution when positioning the shredder head
onto the basket.
1. Position shredder head over basket as shown in
Figure 1.
2. Align slot on back of shredder head with the tab on
the inside rear of the basket.
3. Lower shredder head onto basket (while maintain-
ing tab/slot alignment).
®
Figure 1
A. Paper entry
B. Basket
C. Red LED
D. Auto-start sensor
E. Power switch
F. Shredder head
A
B
E
D
F
C
