ENGLISH
Model HS-440
Will shred:
Paper only
Will not shred:
Adhesive labels, continuous form paper, transparencies, newspaper, junk
mail, credit cards, CD/DVDs, staples, paper clips, cardboard, laminates, file folders, X-rays
or plastic other than noted above
Paper shred size:
High Security ..................................... (Din 6) 1/32 in. x 3/16 in. (0.8mm x 5.0mm)
Maximum:
Sheets per pass .....................................................................................................4*
Paper entry width .......................................................................9-1/2 in. (240 mm)
* 8.5 in. x 11 in., 20lb., (75g) paper at 120V, 60 Hz, 3.2Amps; heavier paper, humidity or
other than rated voltage may reduce capacity.
*In order to perform at capacity, shredder must be plugged into a dedicated 15Amp, 120V
outlet and oiled every 15-30 minutes of continuous use.
CAPABILITIES
KEY
H. Control Panel and LEDs
1. ON/OFF (blue)
R
2. Reverse (red)
3. Bin full (yellow)
4. Door open (red)
5. Safety Shield Open (red)
A. Safety Shield
B. Paper entry
C. Disconnect switch (open door)
D. Door
E. Basket
F. Casters
G. See safety instructions
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
15
• Operation, maintenance, and service requirements are covered in the instruction
manual. Read the entire instruction manual before operating shredders.
• Keep away from children and pets. Keep hands away from paper entry. Always set
to off or unplug when not in use.
• Keep foreign objects – gloves, jewelry, clothing, hair, etc. – away from shredder
openings. If object enters top opening, switch to Reverse (R) to back out object.
• Never use aerosol products, petroleum based lubricants or other flammable
products on or near shredder. Do not use canned air on shredder.
• Do not use if damaged or defective. Do not disassemble shredder.
Do not place near or over heat source or water.
• This shredder has a Disconnect Power Switch in the cabinet door. The door must
be fully closed to operate shredder. In case of emergency, open cabinet door. This
action will stop shredding immediately.
• Avoid touching exposed cutting blades under shredder head.
• Shredder must be plugged into a properly grounded wall outlet or socket of the
voltage and amperage designated on the label. The grounded outlet or socket
must be installed near the equipment and easily accessible. Energy converters,
transformers, or extension cords should not be used with this product.
• FIRE HAZARD – Do NOT shred greeting cards with sound chips or batteries.
• For indoor use only.
• Unplug shredder before cleaning or servicing.
• Do not operate the machine without the safety shield closed (A).
15
15
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
15
BASIC SHREDDING OPERATION
BASIC SET UP
Ensure access to a
dedicated 15Amp,
120V outlet
R
R
R
R
R
R
R
R
4
1
3
R
R
R
R
R
R
R
R
2
Open the door
R
R
R
R
1
2
3
4
or
5
R
R
Place cutter head into
top of cabinet, use 2
people
Plug in and make
sure door is closed
Press ( ) ON to
activate
When finished
shredding set to
( ) OFF
Feed paper straight
into paper entry and
release
Do nothing and shredder
will automatically shut-
off after 30 minutes of
inactivity
Make sure safety flap
is securely in place
SHREDDER SET-UP
TO SHRED
A
.
B.
G.
H.
F.
E.
D.
C.
