A
B
C
Equipment Parts
1. Waste Paper Cover
2. Punching Area
3. Plastic Comb Binding Lock
4. Punching/Binding Handle
5. Margin Guide
6. Binding Area (Metal Rakes)
Using the Binding Machine
Punching Holes
1. Use the margin guide on the left-most side of the
punching area to align, slide all the sheets to the back
of the punching area.
NOTE: a maximum of 5 sheets can be punched at a
time.
2. Lower the punching handle to punch holes in the
paper.
3. Return handle to its original position and remove
sheets.
4. Repeat until all sheets and covers have been punched.
Binding the Document
Use the table below to select the appropriate plastic
comb according to the number of sheets to be bound:
No. of
Comb Diameter
Sheets
Inches
mm
2-20
1/4”
6 mm
21-40
5/16”
8 mm
41-55
3/8”
9.5 mm
56-90
1/2”
12.5 mm
91-100
9/16”
14.0 mm
101-120
5/8”
15.5 mm
1. Insert the plastic comb behind the metal rake on top
of the machine. Be sure the open side of the plastic
comb’s teeth are facing upward. Slide comb to left.
2. To open comb, push the handle downward.
NOTE: The maximum a comb can be opened will vary
by the diameter of the comb.
3. Move the binding lock to the right to secure open
position of comb.
4. Insert the punched sheets onto the open comb. (For
a correctly bound document, the first page of your
document should be the first one placed onto the
comb.)
5. To close comb, release lock by pushing downward on
the handle, allowing the handle to automatically
return to its original starting position.
NOTE: Lock may also be released by simply moving it
to the left, away from teeth.
6. To remove bound document, slide it to the right and
lift upward.
Emptying Paper Cuttings
To remove, simply raise the waste paper cover located
on either side of the machine. Pick up machine and
tip it toward the same side as the raised cover. To be
sure all paper clippings have been removed from the
machine, gently shake the machine. To prevent
clogging and jamming, be sure to empty paper
clippings frequently.
2
1
2
1
2
Maximum Punching Capacity: 5 Sheets
Binding Diameter
Sheets
1/4"
6mm
5/8"
16mm
5/16"
8mm
3/8"
10mm
1/2"
12.5mm
9/16"
14mm
20
40
55
90
100
120
1
2
3
4
5
6
