SafeSense
®
is active and
working properly
SAFESENSE
®
TECHNOLOGY OPERATION
SLEEP MODE OPERATION
Automatically stops when hands touch the paper opening.
Energy saving feature shuts down the shredder after
2 minutes of inactivity
Touch test area and
look for the SafeSense
®
indicator to illuminate
Turn the shredder on to
activate SafeSense
®
SET-UP AND TESTING
AUTO
C-485
Ci
2
1
AUTO
C-485
Ci
3
AUTO
C-485
Ci
3
AUTO
C -4 8 5 C i
WHEN IN SLEEP MODE
1
In sleep mode
To get out of sleep mode
touch control panel
insert paper
or
2
CLEANING AUTO-START INFRARED SENSORS
PRODUCT MAINTENANCE
Paper detection sensors are designed for maintenance free operation. However, on rare occasions, the sensors may become blocked by paper dust causing the motor to run
even if there is no paper present.
(Note: two paper detection sensors are located in the center of the paper entry.)
TO CLEAN THE SENSORS
Turn off and unplug
shredder
Lift CD flap
Locate Auto-start
infrared sensor
Dip cotton swab in
rubbing alcohol
Using cotton swab, wipe
away any contamination
from the paper sensors
4
C-485
C
3
C-485
C
5
1
AUTO
C-485
C
2
REFILLING THE OIL
Low oil indicator will
signal when your reservoir
needs refilling
To maintain shredder
performance, refill oil
reservoir with up to 12
oz. (355 ml.) of shredder
oil (Fellowes 35250)
Once refilled, automatic
oiling will resume
• All cross-cut shredders require oil for peak performance. If not oiled, a machine may experience diminished sheet capacity, intrusive noise when shredding and
could ultimately stop running. We recommend that you refill the Auto Oil
TM
reservoir as instructed for optimum performance.
• If shipping shredder, oil must be drained. Open cabinet door and remove basket to access oil drain plug. Place suitable container under drain,
remove plug and let oil drain out. Replace plug.
AUTO OIL
TM
Automatically oils the cutters to enhance performance and extend shredder life.
(Auto oil system is only included on cross-cut models - 425Ci and 485Ci)
AUTO
C-485
C
2
1
ENGLISH
Models 425Ci/425i/485Ci/485i
AUTO
C -4 8 5 C i
3
ADVANCED PRODUCT FEATURES
