TROUBLESHOOTING
Shredder doesn’t start:
Make sure switch is in auto position ( ).
Make sure safety lock is in unlock position.
Make sure head is on basket correctly.
Check for jam.
Remove and empty basket.
Wait 30 minutes for motor to cool down.
LIMITED PRODUCT WARRANTY
Safety Lock prevents accidental operation. To set, wait for shredding to stop, set control switch to Off (O) position, then slide black button down.
To unlock, slide black button up. For greater safety, always unplug shredder after use.
Limited Warranty: Fellowes, Inc. (“Fellowes”) warrants the parts of the machine to be free of
defects in material and workmanship and provides service and support for 1 year from the date of
purchase by the original consumer. Fellowes warrants the cutting blades of the machine to be free
from defects in material and workmanship for 3 years from the date of purchase by the original
consumer. If any part is found to be defective during the warranty period, your sole and exclusive
remedy will be repair or replacement, at Fellowes’ option and expense, of the defective part. This
warranty does not apply in cases of abuse, mishandling, failure to comply with product usage
standards, shredder operation using an improper power supply (other than listed on the label), or
unauthorized repair. Fellowes reserves the right to charge the consumers for any additional costs
incurred by Fellowes to provide parts or services outside of the country where the shredder is initially
sold by an authorized reseller. ANY IMPLIED WARRANTY, INCLUDING THAT OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED IN DURATION TO THE APPROPRIATE
8"33"/5:1&3*0%4&5'035)"#07&*OOPFWFOUTIBMM'FMMPXFTCFMJBCMFGPSBOZDPOTFRVFOUJBM
or incidental damages attributable to this product. This warranty gives you specific legal rights.
The duration, terms, and conditions of this warranty are valid worldwide, except where different
MJNJUBUJPOTSFTUSJDUJPOTPSDPOEJUJPOTNBZCFSFRVJSFECZMPDBMMBX'PSNPSFEFUBJMTPSUPPCUBJO
service under this warranty, please contact us or your dealer.
BASIC SHREDDING OPERATION
PAPER/CARD
Continuous operation:
Up to 3-minute maximum
NOTE:
Shredder runs briefly
after each pass to clear entry.
Continuous operation beyond
3-minutes will trigger
30-minute cool down period.
PAPER JAM
PRODUCT MAINTENANCE
*Only use a non-aerosol vegetable oil in long nozzle container such as Fellowes 35250
Set to Off ( )
Set to Reverse (
)
for 2-3 seconds
*Apply oil across entry
"MMDSPTTDVUTISFEEFSTSFRVJSFPJMGPSQFBL
performance. If not oiled, a machine may
experience diminished sheet capacity, intrusive
noise when shredding and could ultimately
stop running. To avoid these problems, we
recommend you oil your shredder each time
you empty your waste bin.
OILING SHREDDER
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
Alternate slowly back and forth
Set to Reverse (
)
for 2-3 seconds
Set to Off ( )
and unplug
Gently pull uncut
paper from paper
entry. Plug in
Set to Auto-On ( )
and resume shredding
Plug in and set to
Auto-On ( )
1
3
1
3
2
4
6
5
H-7C
7
3
H-7C
7
Feed paper/card
straight into paper
entry and release
When finished shredding,
set to Off ( )
1
3
2
H-7C
7
3
