Fellowes Voyager 125, Instructions Manual

Switch off the machine at the wall. Allow the machine to cool.
The outside of the machine can be cleaned with a damp cloth. Do not use solvents or flammable materials to polish the machine.
Cleaning sheets can be used with the machine. When the machine is warm – run the sheets through the machine to clean any residue 
off the rollers. For advanced Cleaning of the inside of the laminator, please see the section on the CleanMe function above. Use Fellowes 
Laminator wipes (#57037) only for the internal cleaning.

Problem

Possible cause

Solution

No symbols showing in LCD screen

Machine is not switched on

Switch on machine at rear next to plug inlet 

and at the wall socket, then press standby 

button to left of LCD screen

Ready screen does not come on after a long 

period

Machine is in a hot or humid area

Move the machine to a cooler and dry area

Pouch does not completely seal the item

Item may be too thick to laminate

Pass through the machine again

Temperature setting may be incorrect (manual 

operation)

Use AutoLam setting or check that pouch 

thickness is correctly selected and pass 

through again

Item comes out the front of laminator again

Item too thick to laminate

Choose thinner pouch and try again

Machine speed and noise varies during 

lamination

Items of different thickness laminated

No problem – AutoLam automatically 

senses the thickness of inserted pouch and  

uses optimum settings

How to stop machine when laminating?

Machine is laminating

Press “Reverse” [ ] to exit pouch or 

“Left” [ ] to return to “home” menu 

screen

Pouch is lost in the machine

Pouch is jammed

Select reverse button and pull out the 

item by hand or open laminator manually 

via the LCD and follow steps described in 

CleanMe

Jamming

Pouch was used ‘open end’ first
Pouch was not centered & straight on entry
Empty pouch was used

Pouch is damaged after lamination

Damaged rollers or adhesive on rollers

Open laminator manually via the LCD and 

follow steps described in CleanMe

Cannot open top cover to gain ‘Easy Access

Top cover locking screw is still located on the left 

side of the machine

Remove the screw then open the lid as 

advised

Small pouch is lost in machine

Pouch may be  too small to use without a carrier

Select Easy Access, and open the machine. 

Remove the pouch and laminate small 

pouches with a carrier

STORAGE & EXTERNAL CLEANING

TROUBLESHOOTING

10