17
VIII. CHARGING THE DC POWER PACK
To minimize the possibility of reduced DC Pack capacity due to cell memory
effect, do not charge the DC Power Pack until the low battery indicator is
illuminated !
To Charge the DC Power Pack
1. Press the release buttons on the DC Power Pack and firmly pull the Pack out of the
PowerStrobe DC Power handle.
2. Connect charger to an appropriate outlet before inserting DC Power Pack.
3. Insert the DC Power Pack into the charger as shown above.
The
red
light will blink continuously indicating that the charging process has started.
• Charge time is approximately 1 hour.
4. The completion of charge will be indicated by the
red
light remaining ON continuously.
5. The pack is fully charged and may be used at this time or left in the charger.
CAUTION:
MAINS voltage present at charging terminals. Do not probe with conductive objects.
Danger of electric shock or electrocution may result.
