INSTALLATION GUIDE
TATE AERLUX™ SHOWER ROSE
WHAT IS IN THE PACK
Wall Flange
Shower Rose
Fixed Shower Arm
Flow Regulator
(prefitted)
1x Purple
Aerlux™ Jet
1x Orange
Aerlux™ Jet
CHOOSING THE AERLUX™ JETS FOR MAINS PRESSURE...
For a
softer shower
, install
the Orange Aerlux™ Jet
With the
Flow Regulator
fitted
For a
harder shower
, install
the Purple Aerlux™ Jet
O-ring
(fitted into
wall flange)
SYSTEM REQUIREMENTS
To ensure the optimum performance and customer satisfaction please adhere to the following:
• Flush out all pipe work prior to installation.
• Installation should comply with relevant local authority requirements.
Failure to comply with the above will void warranties
AS/NZS 3500.1 states that pressures above 500kPa can cause damage from water hammer, reduce the life of appliances, taps & fittings,
cause excessive noise in the system and recommend that a pressure limiting valve (PLV) be fitted.
*Without an Aerlux™ jet or flow regulator fitted
Operating Pressures
Operating Hot Water Temperatures
Operating Cold Water Temperatures
MINIMUM
MAXIMUM
70kPa (10.2psi)* 70kPa (10.2psi)*
500kPa (72.1psi)
55° C
60° C
5° C
N/A
Hot
Cold
