A
B
1. Remove nut from yoke and door post and attach as-
sembled windshield.
2. Attach assembled windshield to outside of yoke with
nut removed and 1/4” x 1” bolt and nut to other side of
windshield
3. Tighten all bolts.
WINSHIELD ATTACHMENT
1. Locate holes in door post and cut holes in fabric.
2. Hold door (A) to door post and bottom of windshield.
3. Mark location of holes in door post to door
4. Cut 5/8” slots next to wire frame of door and attach to
door post using two (4) #10 x 3/4” bolts, clips, and
nuts.
5. Tie door flap (B) to motor cover.
6. TIGHTEN
ALL
BOLTS.
DOORS
1. Mark location of holes in windshield to left window (A).
2. Cut 5/8” slots next to wire frame of left window and at-
tach to windshield using two (2) #10 x 3/4 bolts and
nuts.
3. At location (B) cut 5/8” slots inside window and top of
door and attach using one (1) #10 x 3/4” bolt, nut &
clip.
4. Tighten
bolts.
LEFT WINDOW
A
B
Summary of Contents for WEATHERBRAKE 2175
Page 8: ...NOTES...
