1. Thread cloth strap through grommets at bottom of mo-
tor cover and tie.
2. Route cloth straps to other side or to a point on tractor
and tie.
IMPORTANT
Cloth straps are not to be attached to any moving, ro-
tating, or heat generating points of tractor. Any excess
cloth strap is to be cut off
.
TIE STRAPS
1. Remove nut from yoke and door post and attach as-
sembled windshield.
2. Attach other side of windshield to yoke using one (1)
1/4” x 1” bolt and nut.
3. Tighten all bolts.
WINDSHIELD ATTACHMENT
1. Attach left and right window frames using two (2) #10 x
3/4” bolts and nuts.
2. Slide glass into the channel of the windshield.
3. Attach flat strip and angle strip to the windshield using
two (2) #10 x 3/4” bolts and nuts.
WINDSHIELD ASSEMBLY
