9
EN
1 INTRODUCTION TO USE ...................................... 9
2 INSTALLATION ....................................................... 10
3 ADJUSTMENT ........................................................ 11
4 USE ........................................................................ 11
5 ACCESSORIES ...................................................... 13
6 MAINTENANCE ...................................................... 13
7 TROUBLESHOOTING ........................................... 14
1
INTRODUCTION TO USE
Before starting work with your sawing machine, carefully
read this instructions manual so that you are familiar with
the machine and its uses and where it should not be used.
Keep this manual in a safe place. It is an integral part of
the machine and should be used for reference in operating
the machine correctly and in the proper safety conditions.
Use the machine only and exclusively for the uses
specified below, as recommended in this manual. The
machine should not in any way be tampered with, or forced,
or used for unsuitable purposes.
1.1
SYMBOLS PLACED IN CORRESPONDANCE
WITH USAGE POINTS
Never underestimate the warnings “ATTENTION -
CAUTION” given in this manual.
In order to draw the user’s attention and to preserve safety,
hazardous operation are preceded by symbols and notes
that point out the danger and explain how to behave to
avoid any risk. These symbols and notes are divided in
three categories, identified by the following words:
ATTENTION: dangerous-behaviours that could
cause serious injuries.
CAUTION: behaviours that could cause slight
injuries or damages to things.
NOTE: the notes preceded by this symbols are
technical and are aimed at making operations
easier.
1.2
SAFETY AND RULES
The machine was designed and built according to the
Community Directives in force:
EEC 98/37 - EEC 91/368
- EEC 93/68 - EEC 73/23 - EEC 89/336.
The enclosed CE Declaration of conformity, togheter with
the CE mark on product, essentially comprise and are an
integral part of the machine : both guarantee product
conformity with the aforesaid safety Directives.
1.3
RECOMMENDED AND NOT RECOMMENDED
USAGE
This belt sawing machine was designed and constructed
according to the most advanced technologies and may be
used for all cutting requirements for metals commonly
used in industry and artisanship.
It can cut:
- COMMON STEELS (FE 37...)
- SPECIAL STEELS (C 40, 18NiCrMo5...)
- ALUMINIUM AND ITS ALLOYS
- BRASS
- BRONZE
- STEEL TUBING (FE 35, FE 52...)
- PROFILED SECTIONS IN SHEET METAL AND
ALUMINIUM
It is not suitable for cutting:
- WOOD AND SIMILAR MATERIALS
- BONE AND SIMILAR MATERIALS
ATTENTION: The band saw has been developed
and manufactured to cut in dry condition; the
use of any cooler by lubricating oil makes the
machine unusable.
Matr. n. ...........
