background image

4

MAC address and PIN is required to connect the energizer 
to a Wi

-

Fi network, which are listed on the label on the 

back of this manual and in the product box.
Please keep these details carefully for any changes.

We recommend that this manual is read thoroughly and fully 
understood before using the device and that it is retained for 
future reference!

2.

IMPORTANT RECOMMENDATIONS

 

The energizer will provide better protection for your animals and land. Local conditions and 

surroundings always affect the device function and for that reason the manufacturer is not 

able to guarantee full protection against damage to the enclosure fence.

 

Only use the original 14 V / 2 A adapter to supply the generator. The supply voltage must not 

exceed 16 V. Controller must be used if the solar panel is used as the generator must not be 

connected directly to the panel.

 

Switch off the energizer before carrying out any work on the electric enclosure fence.

 

Read thoroughly the Safety Guidelines paragraph.

 

Strictly observe all safety guidelines during installation work.

 

Do not connect the device on one enclosure fence to another appliance. Damage to all co-

nnected devices and appliances may occur in the event of lightning strike.

 

The device may only be repaired by the manufacturer’s qualified personnel.

•  Please dispose all waste in accordance with your country’s code of practice.

 

Do not let the unconnected battery cable hang freely as the short circuit and the consequent 

destruction of the generator may take place.

 

The displayed output voltage tolerance is ±10%.

3.

PACKAGE CONTENTS

 

Energizer fencee 

energy Smart DUO EDW

 

Earthing cable 150 cm

 

Connecting cable to the fence system 100 cm

 

Wi-Fi antenna

 

14 V / 2 A power supply adapter for mains connection

 

Battery cable 170 cm

 

fencee warning sign 

 

2 installation self-tapping screws and rawlplugs

 

User Manual

Summary of Contents for energy Smart DUO EDW100

































Reviews: