Fender Lost Highway Phaser, Manual

Rate 1

While the 

Slow

 speed is selected, the Rate 1 control adjusts the speed 

of the modulation.

Rate 1 LED

This LED is illuminated when the 

Slow

 Speed is engaged. Rate 1 and 

Rate 2 are active when this LED is on. 

Depth 1

While the 

Slow

 speed is selected, the Depth 1 control adjusts the 

intensity of the phaser. 

Center LED (LED between Depth 1 and Rate 2)

This LED blinks in time with the rate of the Lost Highway. 

Rate 2

While the 

Fast

 speed is selected, the Rate 1 control adjusts the speed 

of the modulation.

Rate 2 LED

This LED is illuminated when the 

Fast

 Speed is engaged. Rate 1 and 

Rate 2 are active when this LED is on. 

Depth 2

While the 

Fast

 speed is selected, the Depth 1 control adjusts the 

intensity of the phaser.

Blend

The Blend control adjusts the Wet/Dry mix of your instrument’s signal 
and the Lost Highway’s modulated signal. When the control is set to 
50%, classic phasing is achieved. When the control is set to 100%, the 
pedal will produce harmonic vibrato. At 0%, the pedal has no 
modulation effect. 

Feedback

The Feedback control adjusts the amount of resonance of the Phased 
signal. Turn the knob clockwise to add more resonance. 

Wave Type Switch

This switch allows you to toggle between sine and triangle shaped 
modulation.

Phase Stage Switch

This switch allows you toggle between 4 and 8 stage phasing.