Fender Mustang LT25, User Manual

To delete an effect, the steps are very similar to those on page 10. As before, access the contents of a preset 

by pressing the ENCODER on it, then use the ENCODER to scroll to an occupied effect category box. Press the 

ENCODER again to see the effect contained in the effect category box; the name of the effect model is high-

lighted at the top of the DISPLAY WINDOW:

Press the ENCODER once more to activate the effect replacement function; the box surrounding the effect 

name will turn from blue to red, and white arrows will bracket the effect name. Turn the ENCODER 

counter-

lockwise

 until the red-highlighted effect label at the top of the DISPLAY WINDOW reads “NONE”. Press the 

ENCODER on “NONE” (or press the BACK utility button), after which the user is returned to the preset screen 

with the previously occupied effect category box now empty:

To add an effect to an empty effect category box, first access the contents of a preset by pressing the ENCOD-

ER on it, then use the ENCODER to scroll to the empty effect category box. Press the ENCODER again to access 

the empty effect category box; the red-highlighted label “NONE” bracketed by white arrows will appear at the 

top of the DISPLAY WINDOW:

Turn the ENCODER 

clockwise

 to scroll through effects models in that category. Press the ENCODER on the 

desired effect, after which the box surrounding the effect name will return to blue and the effect is added—

although not yet saved—to that effect category box. Alternately, press the BACK utility button (

green arrow

) 

to return to the preset contents screen (

see illustrations on next page

):

11

AMPLIFIER

DELAY

MOD

TWIN CLEAN

STOMP

REV

01 FENDER C...

5.5
5.5
5.5

DECAY

LEVEL

TONE

SMALL ROOM

NONE

01 FENDER C...

AMPLIFIER

DELAY

MOD

TWIN CLEAN

STOMP

REV

STOMP

01 FENDER C...

AMPLIFIER

STOMP

MOD

REV

50S TWIN

DELAY

NONE