Fender Mustang LT50, User Manual

IMPORTANT: If edited amp control settings are not saved, the preset will revert to its original amp control 

settings when returning to the preset after leaving it, or when turning the amplifier off and back on again. To 

save edited amp control settings, press the SAVE utility button and use the ENCODER to scroll to one of three 

options—SAVE, SAVE AS or REPLACE. Each is detailed below. 

SAVE: Keeps an edited preset in the same location with the same name. To do this, press the SAVE utility 

button and use the ENCODER to scroll to “SAVE”. Press the SAVE utility button again or press the ENCODER. A 

brief “PRESET SAVED!” screen will then flash before returning to the original preset screen:

SAVE AS: Enables saving a preset in a different position, with or without a different name. To do this, press the 

SAVE utility button and use the ENCODER to scroll to “SAVE AS”. Press the ENCODER to access a “CHOOSE SLOT” list 

of locations where the preset can be moved. Select a new location by turning and pressing the ENCODER:

Whether renaming the preset or not when using “SAVE AS”, a name must be entered by pressing the ENCOD-

ER to activate a cursor, then spelling out the name by turning and pressing the ENCODER to scroll through 

and select characters. All characters can be cleared by using the ENCODER to scroll to and select “CLEAR ALL”. 

When name entry is completed for the new location, save it by pressing the SAVE utility button or by using 

the ENCODER to scroll to and select “SAVE”. A brief “PRESET SAVED!” screen will then flash before returning to 

the original preset screen:

6

22

SUPER

ROCK

SAVE

REPLACE

SAVE AS

PRESET SAVED!

22

SUPER

ROCK

SAVE

REPLACE

SAVE AS

04 ROCK A B...

22 SUPER RO...

21 TOUCH W...

23 NICE FLA...

25 SURF MU...

24 VIBRA DO...

CHOOSE SLOT

S U P E R _ _ _

O C K _ _ _ _

R

SAVE

CLEAR ALL

RENAME

PRESET SAVED!