The FS MODE footswitch at upper right toggles between Presets Footswitch mode and Effects Footswitch
mode. A single press of the FS MODE footswitch toggles the unit into Effects Footswitch mode, which
provides pedalboard-style on/off control of effects. This enables real-time foot control of effects in a preset.
Several footswitch layout options are available for both Presets and Effects footswitch modes. Touch the
gear symbol to access the Global Settings menu and select Footswitch to see available options.
Press the FS MODE footswitch again to toggle the unit out of Effects mode and back to Presets mode.
Press to toggle between Preset and
Effect FS modes; press and hold for two
seconds to access the looper
28
LOOPER
Press and hold the FS MODE footswitch for two seconds to enter Looper mode. The Looper can record stereo loops up to one minute long at full
speed and is available in all presets. In Looper mode, the footswitches are automatically reconfigured as looper controls:
•
RECORD/OVERDUB:
Press to begin recording a loop; press again to overdub; footswitch LED flashes to indicate both. Scribble
strip indicates which mode is in use (recording or overdubbing).
•
PLAY/STOP:
Press to stop recording/overdubbing and start loop playback. Press again to stop playback. Footswitch LED illuminates
during playback and turns off when playback is stopped. Scribble strip indicates which mode is in use (playing or stopped).
•
1-SHOT:
Press to play loop a single time. Footswitch LED
illuminates for single play
and turns off when loop completes.
•
1/2 SPEED:
Press to change playback/record speed to half speed, which results in an octave-down effect for playback. Footswitch
LED illuminates until footswitch is pressed again to return to full speed. When recording at half speed, switching to full speed will result in
the loop sounding an octave higher than originally performed.
•
REVERSE:
Press to reverse playback direction during recording, overdubbing or playback. Footswitch LED illuminates until
footswitch is pressed again to return to forward direction.
•
LOOP VOLUME UP/DOWN:
The two footswitches at far left function as loop volume up/down controls, in 0.5 dB increments.
•
EXIT:
Press to exit Looper mode and return to previous footswitch mode.
Note that all looper parameters are saved globally, that tap tempo and tuner functions remain available while in Looper mode, and that Loop
playback will continue across presets.
In Looper mode, footswitches are reconfigured as looper controls
FS MODE
HOLD: LOOPER
