Figure Q
Figure P
Pickup Height Adjustment
Properly adjusted pickups will ensure that your bass is performing to the best of its capability. On the other hand, improper pickup height can be
the source of a couple of potentially confusing problems. Pickups set too low will appear to have a loss of output. Pickups set too high can cause
excessive
magnetic string pull, which may result in pitch warbling or false sharp readings when intonating your instrument. The pickups on your
new bass are height adjustable for locating them in the appropriate relative position to the strings for optimum performance.
To measure pickup height, depress each of the outside strings at the last fret. Using your ruler, measure the distances from the bottom of the
strings to the top of the corresponding pole pieces on the pickups,
(
Figure P
)
. For pickups without pole pieces, or those having flush mounted pole
pieces, measure to the pickup surface. Use the
Pickup Height Adjustment Chart
as a starting point.
The actual height you adjust to may vary, depending on the amount of magnetic pull of the pickup and the type of strings you are using. Heavier
gauges of strings generally produce a higher amplitude of vibration and may require a bit more clearance. Adjust pickup height with a small Phillips
screwdriver,
(
Figure Q
)
.
Note: When adjusting a pickup higher, it may be necessary to physically pull the pickup up into its raised position, as the
foam spacer under the pickup typically compresses over time and will need the lift to help it expand and fill the void.
22
Set-up
Summary of Contents for Vintage Style Precision Bass
