Fendi TIMEPIECES, Manual

12

ENGLISH

Adjusting the chronograph hands to the zero position

If one or more chronograph hands are not exactly in the zero position (e.g. following a battery change), they must be 

adjusted in turn. To do this, pull the crown out to position 

II

. The 3 chronograph hands move to their zero position (correct 

or incorrect).

Setting the hour counter hand

Press the push button 

A

 to activate the hour counter.

Press the push button

 B

 to move the hour counter hand opposite the 

10 

division.

Setting the 30 minute counter hand

Then press the push button 

A

 to activate the minute counter.

Press the push button

 B

 to move the minute counter hand opposite the 

30 

division.

Setting the center seconds hand

Then press the push button 

A

 to activate the chronograph second (second hand).

Press the push button 

B

 to move the chronograph's second hand opposite the 

0

 or 

12 h

 division.

Push the crown against the case to return it to the normal operating position 

I

. The chronograph hand setting 

operation is complete.

Setting the date/time following a battery change
Example:

–  Date/time indicated by the watch: 17/01:25

–  Current date/time: 4/20:30

1.

   Pull the crown out to position 

II

. The hands continue to rotate.

2.

   Turn the crown until yesterday’s date is indicated.

3. 

 Pull the crown out to position 

III

. The seconds hand will stop.

4.

   Turn the crown until the correct date is indicated.

5.

   Turn the crown until the correct time is indicated.

6. 

 Push the crown against the case to return it to the normal operating position 

I

.

To set your watch to the exact second, please refer to the section entitled "Setting the time".

QUARTZ CHRONOGRAPH WATCHES – 3 COUNTERS