12
13
ENGLISH
ENGLISH
General information
Fendi Timepieces mechanical watches are equipped with Swiss Made automatic movements which are wound
by an oscillating weight activated by the natural movements of the wearer's wrist. They generally have a power
reserve of approximately 38 hours.
Manual winding
If you wear your watch, it does not need to be wound manually.
However, if it is left for approximately 38 hours without being worn, it will need to be wound manually. To do this, simply
turn the crown a few revolutions (forward), or move the watch sideways a few times to restart it. The crown must be rotated
approximately 32 times (forward) to give the watch its maximum power reserve.
Setting the time
The time is set by means of the crown. To do so:
1.
Pull the crown out to position
II
(or
III
if your watch has a date indication).
2.
Turn it forward or backward until the correct time is shown, e.g. 08:45.
3.
Push the crown against the case to return it to the normal operating position
I
.
Setting the date (quick mode)
If your watch has a date indication, it will change automatically when the time indicator hands pass midnight.
However, if necessary, a quick date correction function is available by means of the crown, without altering the
time. To do so:
1.
Pull the crown out to position
II
.
2.
Turn it
forward
until the correct date is shown in the window.
Make sure that the date change occurs at midnight rather than midday.
3.
Push the crown against the case to return it to the normal operating position
I
.
Please note:
During the date changing phase between 21:00 and 00:00, the date must be set
to the following day
.
AUTOMATIC WATCHES
Summary of Contents for TIMEPIECES
Page 1: ......
