background image

18

ENGLISH

General information

We recommend that you take the following precautions to ensure that your watch from Fendi Timepieces functions per­

fectly for many years:

1. 

 Avoid thermal shocks and high temperatures (sauna, Turkish bath, etc.).

2.

  Avoid contact with corrosive products.

3.

  Any impact to the case, crown or crystal may compromise water resistance and damage the mechanism. If a part breaks 

or comes loose, have your watch repaired immediately.

4. 

 Avoid violent impacts and blows; even though the sapphire crystal is highly resistant, avoid bringing it into contact with 

objects likely to scratch it.

5. 

 Certain cases have PVD treatment which increases their resistance to abrasion. However, contact with abrasive products 

should be avoided.

6. 

 Avoid leaving your watch immobile for long periods. Wearing it regularly will prevent the oils necessary for optimum 

operation of the movement from coagulating.

7. 

 The leather straps on watches from Fendi Timepieces are made using very high­quality leather. To maximize the life of 

the leather, avoid contact with perfumes, chemical products or salt water.

Water resistance

A watch's water resistance cannot be guaranteed indefinitely. It may be affected by ageing of the gaskets or acciden­

tal impacts to the crown. We recommend that you have your watch's water resistance checked once a year by a Fendi 

Timepieces Approved Service Center.
Never adjust the time­setting crown and/or push buttons when the watch is underwater, and make sure that the crown is 

pushed in fully against the case after each adjustment. 
After immersion in salt water, rinse your watch in fresh water and dry thoroughly. Do not use corrosive products to clean 

your watch.
Depending on the model, your watch from Fendi Timepieces may be water resistant to 30 m (3 ATM), 50 m (5 ATM), 

100 m (10 ATM) or 300 m (30 ATM), however it cannot be considered a diving watch. Please refer to the following 

recommendations:

Water resistance to 30 m (3 ATM) protects the watch from rain and splashes, and means it can be worn for sur­

face swimming. However, it should not be worn in the shower.

Water resistance to 50 m (5 ATM) means the watch can be worn in the shower and during low­impact aquatic 

sports (e.g. not water skiing).

Water resistance to 100 m (10 ATM) means the watch can also be worn when snorkelling. However, this charac­

teristic does not make it a diving watch. 

Water resistance to 300 m (30 ATM) means the watch can be worn even when scuba diving. However, this 

characteristic does not make it a diving watch. 

PRECAUTIONS FOR USE – MAINTENANCE

Summary of Contents for TIMEPIECES





















Reviews: