Position:
Engine block
411.201.010.010
NOTE:
Do not re-tighten the cylinder head bolts
During initial setup and after repair work, the
cylinder head bolts are tightened in accordance with
the relevant instruction sheet and must not be re-
tightened.
Position:
Left side of engine, at the front above the
front axle
438,500,410,010
Front lubrication points, see maintenance
instructions
Position:
On the right at the back on inside of
mudguard
954,500,410,030
Rear lubrication points, see maintenance
instructions
Position:
Left entrance step
743,810,090,240
Jack points, see maintenance instructions
1. Overall system/tractor
FENDT 800 Vario S4
1-17
X990.005.530.013
