Battery Replacement
Unscrew the tail cap and insert the battery following the polarity marks, then screw the cap
back on.
Charging
1.
Switch off the light and open the USB cap to reveal the USB Type-C charging port and plug the
USB A socket of the charging cable into an electrical outlet, then connect the USB Type-C socket
of the charging cable to the light.
2.
The indicator will display red while charging and will turn green when fully charged.
3.
Once charging is completed, be sure to tighten the USB cap to maintain the dustproof and
waterproof ability.
Note:
1.
The normal charging time of the included Fenix ARB-L18-2600 is approximately 2 hours from
depletion to full charging.
2.
Recharge a stored light every four months to maintain the optimum performance of the
battery.
3.
The Low/Med mode is available while charging, but the charging time will be prolonged.
Note: This only works with Fenix ARB-L18 Series 18650 rechargeable Li-ion battery.
Battery Level Indication
Single click the switch when the light is switched off, the indicator will indicate the battery level
and will last for 3 seconds.
Green light on: saturated 100% - 85%
Green light flashes: sufficient 85% - 50%
Red light on: poor 50% - 25%
Red light flashes: critical 25% - 1%
Note: This only works with Fenix ARB-L18 Series 18650 rechargeable Li-ion battery.
