Ecosun
A (mm)
B (mm)
300 U+
340
280
935 280
600 U+
700 U+
850 U+
Ecosun
X (mm) Y (mm)
Thickness
600 U+
1192 592
30
700 U+
1192 592
850 U+
1192 800
300 U+
592 592
A (mm)
340
940
940
940
B (mm)
355
355
355
355
1. Use
•
Flats, offices, schools, hospitals, shops, industry and agricultural premises, etc.
•
The panels can be installed on flammable materials.
2. Wiring
•
Power supply: 230V/50Hz
•
Protection class I
•
IP 44
•
The panel is fitted with a thermal fuse.
3. Installing
•
The panels are intended for vertical installation. In case of horizontal installation on the ceiling of a room, hang the panel
on a mounting frame, or using chains or cords.
•
The minimum distance of the panel front wall and lateral walls from inflammable objects is 10 cm.
Procedure — vertical mounting:
•
Mark the holes according to the table, drill out the holes, insert the dowels and drive the screw in to protrude
approx. 5 mm.
•
Always fix the panel on two upper locks, two lower locks serve to a reverse suspension of the panel.
•
Connect the lead-in cable to a fixed power distribution in accordance with the colour marking of wires.
•
Put the panel on the two upper locks.
Procedure – horizontal mounting
•
Position the mounting frame in the location where the panel is to be placed, using a pen, mark holes according to the
holes on the frame.
•
Drill the holes, insert the wall anchors and attach the mounting frame with the screws.
•
Connect the lead-in cable to the mains in accordance with the colour of the conductors.
•
Slide the panel into the mounting frame.
Fixing Frame
Summary of Contents for Ecosun 300 U+
Page 11: ...40 C 3 I n 30 600 600 3...
Page 12: ...3 8 3 8...
Page 13: ...1 2 230 50 I IP 44 3 10 5...
