6
Electric installation
The panel is fitted with a two-conductor cable for 1/N 230 V / Hz with a plug for connection into a socket
.
Removal of the plug and shortening of the supply lead will not result in loss of warranty.
Colour marking of the conductors:
Phase – brown
Central (live) conductor – blue
The power supply cable is connected to a box on the wall, see Fig 3.
The panel must not be placed directly under an electric socket.
The supply cable must be fitted with a device for disconnection from the mains in which the distance between the disconnected contacts is
at least 3.5 m for all poles.
If the supply cable of this appliance is damaged, it has to be replaced by the producer or a service technician.
Controlling the panel
We recommend controlling this panel using an external room thermostat with a switch (e.g. Fenix Therm 100).
The room thermostat maintains the set air temperature in the room.
Furthermore, the panel is fitted with a limit thermostat which ensures its safe operation.
Uninstalling the panel
Disconnect the panel from the mains using a two-pole switch before uninstalling it. Lift the panel upwards vertically and sideways in such a
way that it is released from the screws. Furthermore, the supply cable must be disconnected from the box on the wall.
Caution
Only qualified persons may carry out work on the panel. Before launching such work, the panel must be disconnected from the source of
power. As it is made of fragile material, great care needs to be taken during transport, manipulation and installation.
This appliance is not intended for use by persons (including children) whose lack of physical, sensory or mental ability or lack of experience
and knowledge prevents them from safely using the appliance, unless they are supervised or have received instructions regarding the use of
the appliance from a person who is responsible for their safety. Children should be supervised in order to prevent them from playing with the
appliance.
Important safety instructions – WARNING
Do not cover the panel in any situation. The notice “DO NOT COVER” notifies that any material covering the panel may cause a fire. Furniture
must not be placed and curtains must not be hung in front of the panel (see Fig. 6) and free circulation of air must be ensured. Dust must be
removed from the panel regularly, at least before the beginning of every heating season. Do not touch the panel when in the bathtub or
shower!
WARNING: The heater must not be used if the glass is damaged.
The panel can be installed on bases of flammability class
C or D.
Summary of Contents for Ecosun G 300
Page 11: ...11...
