Intelligent overheat protection protects from high surface temperature
Made of quality aluminum and plastic
Certified by CPSIA and REACH
Secure lock for kids: the included Allen wrench is needed for battery cover opening. For
adult use, remove the screw and replace the battery
Accessories: AA battery, Allen wrench, Spare O-ring
Operating Instruction
General Mode
Press and hold the switch for 0.5 seconds to turn ON/OFF the headlamp.
With the lamp switched on, single click the switch to cycle through High→Low→Med.
Red Light
Single click the switch to enter Red light, one more clicking to enter Red flash. Click once again to
turn off red light mode.
The headlamp memorizes the last brightness level used in White light mode. When next turned
on, the previously used brightness level is recalled.
Mode Switching
With the lamp on Red light mode, press and hold to activate White light mode.
Battery Specifications
Warning:
1. It is prohibited to use banned battery in case of overvoltage explosion. Quality
battery is strongly recommended.
2.
If the lamp will not be used for an extended period, remove the battery, or the lamp
could be damaged by electrolyte leakage or battery explosion.
Battery Replacement
1. Unscrew the locking screw to open the battery cover. Lower the holder to 90°angle, and press
Types
Dimensions Nominal
Voltage
Usability
Ni-MH Battery
AA
1.2V
Recommended
√√
ARB-L14-1600U
14500
1.5V
Recommended
√√
Alkaline Battery
AA
1.5V
Usable
√
Lithium Battery
(Non-rechargeable)
AA
1.5V
Cautious
！
Li-ion Battery
(Rechargeable)
10440
3.7V
Banned
×
