When the voltage level drops below the preset level, the headlamp is programmed to downshift
to a lower brightness level until Low mode is reached. When this happens in Low mode, the battery
level indicator blinks to remind you to timely recharge or replace the battery.
Note: This only works with Fenix ARB‐L16‐700P battery.
Headband Assembly
The headband is factory assembled by default.
The headlamp bracket is made of reinforced silicone material, which has good tear resistance
and mechanical strength; it is resistant to low/high temperature, ultraviolet rays, acid and
alkali corrosion; it is comfortable to the touch and will not cause corrosion allergy.
If the headband is stained with sweat and mud, it can be washed directly.
Other Purpose
Detach the headlamp from the holder it can be used as a work flashlight.
Usage and Maintenance
Disassembling the sealed head can cause damage to the lamp and will void the warranty.
Fenix recommends using an excellent quality Fenix battery.
If the lamp will not be used for an extended period, remove the battery, or the lamp could be
damaged by electrolyte leakage.
Lock the lamp or take out the battery to prevent accidental activation during storage or
transportation.
Long‐term use can result in O‐ring wear. To maintain a proper water seal, replace the ring with
an approved spare.
