Periodic cleaning of the battery contacts improves the lamp's performance as dirty contacts
may cause the lamp to flicker, shine intermittently or even fail to illuminate for the following
reasons:
A: The battery needs replacing.
Solution: Replace the battery (Ensure the battery is inserted according to the manufacturer’s
specifications).
B: The contact point or contact of the battery or headlamp is dirty.
Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.
If the above methods don't work, please contact the distributor.
Included
Fenix HM50R V2.0 headlamp, ARB‐L16‐700P LI‐ion battery, USB Type‐C charging cable, Spare O‐
ring, User manual, Warranty card
Warning
The headlamp is a high‐intensity lighting device capable of causing eye damage to the user or
others. Avoid shining the lamp directly into anyone’s eyes.
This headlamp will accumulate a lot of heat when used for extended periods, resulting in a
high temperature of the headlamp shell. Pay attention to safe use to avoid scalding.
Do not shine an object at close range, avoid burning the object or causing danger due to high
temperature.
The LED of this headlamp is not replaceable; so the entire lamp should be replaced when the
LED reaches the end of its life.
