Notice: The headband is factory assembled by default.
1.
Attach the headband to the headlamp as shown (Pic 1), by first sliding the band down to the
bottom of the slots. Then hook the top edge under the top slot.
2.
Adjust the headband by sliding the buckle to required length.
3.
Assemble top headband to better fix the headlamp. First fix the headband mount to the
headband, then fix one side of the top headband to the headlamp holder, and the other end to
the top headband mount.
Usage and Maintenance
Disassembling the sealed head can cause damage to the lamp and will void the warranty.
Fenix recommends using an excellent quality Fenix 18650 battery.
If the lamp will not be used for an extended period, remove the battery, or the lamp could
be damaged by electrolyte leakage.
Long-term use can result in O-ring wear. To maintain a proper water seal, replace the ring
with an approved spare
．
Periodic cleaning of the battery contacts improves the lamp's performance as dirty contacts
may cause the lamp to flicker, shine intermittently or even fail to illuminate for the following
reasons:
A: The battery needs replacing.
Solution: Replace battery (Ensure battery is inserted according to the manufacturer’s
specifications).
B: The threads, PCB board contact or other contacts are dirty.
Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.
If the above methods don't work, please contact the distributor.
Included
HM65R Headlamp, ARB-L18-3500 rechargeable Li-ion battery, Headband, Top headband,
Headband mount, Spare O-ring, Charging cable, User manual, Warranty card
Warning
The headlamp is a high-intensity lighting device capable of causing eye damage to the user or
others. Avoid shining the lamp directly into anyone’s eyes.
