Strobe
With the light switched on, press and hold the round switch for 1.2 seconds to enter Strobe, single
click again to turn back to the previously used output level.
With the light switched off, press and hold the round switch for 1.2 seconds to enter Strobe, single
click to exit.
Lock/Unlock
Lock: with the light unlocked and switched off, double click the round switch to lock the light in
0.5 seconds, the light will blink twice on Low to indicate locked status.
Unlock: with the light locked and switched off, double click the round switch in 0.5 seconds, the
light will be unlocked and activated on Low.
In locked status, clicking or pressing the switch will activate 2 one-second blinks on Low to
indicate locked status.
UVC Light
With the light switched off, unscrew the protective cover to reveal the UVC light; and aim the
object to be disinfected at a distance of about 2 cm. Simultaneously press the side switches to
activate the disinfection function.
Operation Cautions:
1.
A disinfection cycle remains up to 30 seconds, after working for this time or releasing any
UV switch, the UVC light will go out. Release the side switches and simultaneously press
again for the reselection of the UVC light.
2.
An extra blue indicator will be lit to indicate the effective disinfection range since the
UVC light is invisible while working.
3.
The UVC light is quite dangerous to human and animal cells. It is strictly prohibited to
shine the UVC light into the eyes, human body and animal. This flashlight should be
placed beyond the reach of children.
4.
The intensity of UVC light will attenuate along with distance. Therefore the light should
not be kept too far away from the surface of the disinfected object to avoid a poor
disinfection effect. When disinfecting a large area, divide it into areas and disinfect them
one by one.
5.
After the protective cover is unscrewed, it can be screwed to the light tail to avoid loss.
After using, the protective cover should be replaced to maintain the protective
performance of the flashlight and avoid potential safety hazards caused by accidentally
activating the UVC light.
Intelligent Memory Circuit
The light memorizes the last selected output of general mode. When turned on again the
previously used output of general mode will be recalled.
Battery Specifications
