FENIX IMVICO SM2000 OPERATION MANUAL
10/65
1.3- Paper loading
One of the main advantages of the SM2000 printer is its paper loading system. It is so simple to do it
that can be carried out by any final user, without having to disassemble the printer or loading the paper
in a complex paper path.
1.4- Autocutter
The SM2000 performs a partial cut of the receipt automatically, leaving an uncut section of
approximately 2 mm in the center.
1.5- Paper specifications
1) Paper type:
thermal paper roll
2) Paper width:
80 +0/-1mm
3) Paper roll size:
up to a maximum of 100 mm of diameter
4) Specified thermal paper:
TF50KS-E2C
(Nippon Paper Industries)
PD160R-N
(Oji Paper Co.)
HP220AB1
(Mitsubishi Paper Mills Limited)
1.6- Internal buffer
The
SM2000-S
and
SM2000-P
printers contains a
128 Kbytes
internal memory, whose functionality is
dynamically shared by the receiving buffer and the loaded logos. In this way, the receiving buffer uses
the space not occupied by the logos. The maximum capacity allowed for the logos is 127 Kbytes,
whereas the minimum capacity for the receiving buffer is 1 Kbyte.
The
SM2000-U
printer contains a
512 Kbytes
internal memory. In this model, the maximum capacity
allowed for logos is 511 Kbytes, and the minimum capacity for the receiving buffer is 1 kbyte.
By default, the SM2000 printer does not provide any loaded logo; therefore providing 128 Kbytes for the
receiving buffer (512 Kbytes for SM2000-U printer).
This big receiving buffer allows the printer working in the following way: Firstly, all data are buffered, and
afterwards the printing is done at the maximum possible speed, without it being affected by the
communications time processing.
1.7- Electrical specifications
1) Power supply voltage:
24V DC
±
10%
2) Current consumption (at 24V, ambient temperature):
High speed mode:
Average: 1.8 A aprox.
(Characters in capital letters, A font, 36 continuous lines of 42 columns)
Peak: 7.7 A aprox.
Low power consumption mode:
Average: 1.2 A aprox.
(Characters in capital letters, A font, 36 continuous lines of 42 columns)
Peak: 6.6 A aprox.
Non-printing mode:
Average: 0.2 A aprox.
NOTE: 1 A maximum for the coins drawer open operation
3) Internal
fuse
:
4A, 250v slow (164050-4, from ELU or equivalent)
.
1.8- Environmental conditions
1) Temperature range:
Working temperature range: 0ºC to 50ºC
Storage temperature range: -20 a 60ºC (without paper
loaded, in a dry place).
