4
OVERVIEW
1. Platter
Place your record here.
2. 45RPM Adaptor
This adaptor allows you to play 45RPM records.
3. Tone arm
The fixed tonearm can be raised and lowered by hand, or by
pressing the raise / lower lever.
4. Tone arm Lever
Raises and lowers the tonearm.
5. 33 / 45 / 78 RPM Switch
This switch controls the RPM of the turntable platter
6. Autostop Switch ON/OFF
This switch turns auto stop on or off. When the automatic stop is
enabled, the platform will start rotating as soon as the tone arm
is placed over the record and will stop rotating when it has
reached the end of the record. Some vinyl records stop before
the end or do not stop when the end is reached. In this case set
Auto-stop to OFF.
7. Headphone input
Connect your headphone with this 3.5mm(1/8) jack connector.
8. Tone arm Clip
This specially designed arm clip secures the tonearm while at
rest or when not in use.
9. Speaker
Built in stereo speakers.
10.
Cartridge with needle
When the turntable is not in use, it is recommendable to place the removable protection cover on the stylus.
11.
USB port
Use the included USB cable to connect your turntable to your computer.
The USB connection will send audio from the turntable to your computer
12.
DC IN port
Connecting the 5Volt/DC power adaptor.
13. Line output
The audio from a playing vinyl record is sent to this line-level coaxial audio
output. This must not be connected to phono level devices.
OPERATION
1.
Connect the record player with the power adapter and plug the other end into a wall power outlet.
2.
Remove white protective needle cover by gently pulling towards the front of the unit.
3.
Place a vinyl record on the turntable platter and select the desired speed (33/45/78 RPM)
according to the record.
4.
Open the tone arm clip to release the tone arm. Gently move the tone arm and put the cartridge
onto the desired position of the record and the turntable player starts to play.
5.
Turn the volume control knob clockwise to adjust the volume.
Noted:
If the AUTO STOP ON/OFF Switch is turned ON, the record will stop automatically when finished If Auto Stop Control is
turned OFF, record will NOT stop automatically when finished.
