4
PLAYING FROM USB DRIVE
•
Press the function button [5] to enter into the USB mode; it will play automatically when the USB drive is plugged in.
•
To pause playback press the PLAY/PAUSE button [8], to continue playback press PLAY/PAUSE button [8] again.
•
To stop playback press STOP button [9].
•
To skip forwards through tracks press NEXT button [7].If the playback time of current song is more than 3 second,
press PREV button [6] once to the beginning of current song and press PREV button [6] twice to the previous song.
PLAYING A VINYL RECORD
•
Before playing a record please unlatch the Tone Arm Lock [26] and remove the cartridge protector from the
cartridge/needle.
•
Press the function button [5] to enter into the PHONO mode; place the record on the turntable [22], select the speed
required using the Speed Selector [23], then gently place the needle on the record, the turntable will start spinning
when AUTO STOP switch is ON position.
•
Besides the Speed selector, there is a AUTO STOP ON/OFF Switch [25] besides the Speed selector [23]. If the AUTO
STOP ON/OFF Switch is turned ON, the record will stop automatically when finished(For some few vinyl records, it will
stop when it does not come to the end or it will not stop when it comes to the end). If Auto Stop Control is turned OFF,
record will NOT stop automatically when finished.
•
Press the REC button[10], the REC indicator [12] will light up and the letters USB becomes flashing and the vinyl
records will be recorded into USB drive; press the STOP button [9] to save the recorded file and stop recording.
LISTEN TO AN EXTERNAL SOURCE
•
To listen to an external source, such as an MP3 player or smartphone, connect a suitable cable (3.5mm jack to 3.5mm
jack) to the AUX IN socket [17] at the back of this unit, and press the function button [5] to enter into the AUX in mode.
•
Press the REC button[10], the REC indicator [12] will light up and the letters USB becomes flashing and the external
sources will be recorded into USB drive; press the STOP button [9] to save the recorded file and stop recording.
PLAYING VIA BT
•
Press the function button [5] to enter into the BT mode.
•
The BT indicator [11] will become blue colour with flashing.
•
Turn on your BT function on your mobile phone or tablet PC and then search the music center with its name Fenton
record player. After pairing and connection, the BT indicator [11] will become blue colour without flashing, and you can
play your music of your mobile phone or tablet PC on this music center.
•
Press the REC button [10], the REC indicator [12] will light up and the letters USB becomes flashing and the wireless
music will be recorded into USB drive; press the STOP button [9] to save the recorded file and stop recording.
HOW TO REPLACE THE NEEDLE
To replace the needle, please refer to the instructions below.
Removing the needle from the cartridge
•
Place a screwdriver at the tip of the stylus and push downward as
shown in direction “A”.
•
Remove the stylus by pulling the stylus forward and pushing
downward.
Installing the Stylus
•
Hold the tip of the stylus and insert the sty
lus by pressing as shown in direction “B”.
•
Push the stylus upward as in direction "C" until the stylus locks into the tip position.
