730110
K0
頁
10
ES1103
4. Specifications
4-1. Part Number
4-1-1. Detector
(1) Name of item:
Photoelectric smoke detector
(2) Type:
F11-Y1-xx (“xx” means Address. It is on Address seal.)
4-1-2. Mounting Base
(1) Name of item:
Mounting Base
(2) Type:
FBR-Y
4-2. Electric specifications
(1) Rating:
DC24V 0.5mA
(
Be supplied by the control unit. No polarity.
)
(2) Range of Working Voltage:
DC16.0V
~
DC30.0V
(3) Current consumptions
(at DC24V):
0.35mA or less at Normal supervision
0.45mA or less at Alarm mode
(4) Set up for receiving
the Alarm signals:
5
%
/m (Nominal)
(5) State Indication LED:
Red LED (blinking)
State of LED
Normal supervision
10 seconds interval
Alarm mode
2 seconds interval
Trouble mode
Off (not blinking)
Trouble mode gives priority over the Alarm mode.
(6) Self Check Function
(Sensitivity revise):
The Detector revise own sensitivity changes automatically once
a day. Use of Environment and Dirty and Degradation of Optics
parts cause of sensitivity changes.
Limit the amount of sensitivity revision come and failure.
(7) Address:
Addresses are stored in EEPROM. If EEPROM has problem,
Detector will be trouble state.
(8) Power off Time:
Turn off the power on again until 60 seconds margin over time.
(9) Mounting Base:
FBR-Y
(10) Compatible Control Panels: FC1 (For details, refer to the user's manual for the control unit.)
4-3.Mechanical specifications
4-3-1. Detector
(1) External form:
φ28×H47mm
(2) Main material:
ABS, PBT (UL-94V-0)
(3) Color:
Beige
(4) Mass:
Approximately 20g
4-3-2. Mounting Base
(1) External form:
φ28×H10mm
(2)Main material:
ABS (UL-94V-0)
(3) Color:
Beige
(4) Mass:
Approximately 10g