20
Description
Easy handle, high speed die grinder in straight performance. Built for grinding sticks
and rotating files. Suitable for service and maintenance works. Rear air outlet (Pos. 3)
through the handle, reducing the risk of getting dust particles blow in the face of the
user. The tool is equipped with safety lever (Pos. 2), which prevents unintentional
start-up of the tool and automatically returns to the initial position after release of the
lever. Supplied as standard with two fixing spanners plus 3 and 6 mm and 1/4” adapters
(Pos. 1).
17904-0100 is equipped with an extended machine shaft (Pos. 5).
17905-0109 Angled 90°.
Health hazards
• User of the tool should always take care of his and other persons’ safety. The user
must always use personal protective equipment.
• Wear safety goggles, in order to reduce risk of eye injuries that could be caused by
flying sawdust, dust and sparkles.
• Inhalation of dust can be harmful to health. Wear a suitable visor or breathing
apparatus, when working in a dusty environment.
• In case of continuous work wear safety gloves protecting against the cold air.
• In order to avoid eventual aural injuries, always use ear protection when using the
tool.
• The user must always pay attention to the fact that continuous use of rotating and
impact producing manual tools could result in baneful influence on health caused by
the vibration.
• Ergonomic load: Work with the tools related to recurrent, monotone movements and
unfavourable body positions may cause back, scruff, arm, marrowbone and other
joint injuries.
Remember!
• Do not wear loose long hair, loose clothing or jewellery, which could become caught
up in moving parts of the tool and cause injuries and clothing damages.
• A switched-on tool may be directed towards the work material only. Loose parts
may disunite and cause damages. A person or an object may become in contact with
the tool, which could cause an accident or material loses.
• Cold or wet hands, smoking and snivel may increase vibration caused hazards.
