Patented product, counterfeiting
not allowed.
Shenzhen FEREI Lighting Co., Ltd
.
3rd Industrial Zone, Xiakeng
Village, Tongle, Longgang District,
Shenzhen 518116, China.
TEL: 0086 755 8480 7942 / 0086
755 8480 7943
FAX: 0086 755 8480 7944
E-mail: ferei@ferei.com
www.ferei.com
ZOOMABLE OPERATION
Move head cover out and in can be get spot and flood beam.
INTELLIGENT TEMPERATURE CONTROL INSTRUCTIONS
The headlamp is designed with the Intelligent temperature control
system. LED is a component which can make heat and is sensitive to
the tempera ture, it will be damaged or its working life will be shorten
by the overheat temperature, especially the powerful and brightness
LED. So the Intelligent temperature control system works when the
headlamp’s designation and structure cannot realize the heat-
radiation temperature from the high brightness LED lighting. The
system controls the temperature of the LED lamp wick, obviously, the
light gets
different Thermal Conductivity with different structure, and generally
speaking, the surface temperature of the light constant between 50°C
to 60°C, when the headlamp runs heat, the Intelligent temperature
control function will help to reduce the power to cool down the lamp
wick, the brightness of the light will corresponding fell and get lower.
And in comparison outdoor using with the indoor using, outdoor area
using will get wind to cool it down and heat-radiation is better, the
LED will crank up the power and the lights become brighter, and the
process of ascension brightness will smooth and slow without flashes.
At the same time, the intelligent temperature control system will lead
the run time get longer (may be the standard of twice to five times ).
Particularly, the run time will depend on the temperature, running
speed even the wind strength, so the actually run time will be a little
different according to the environment of the light using.
CAUTION
To avoid unnecessary incidents, please take notice of the following
precaution points:
WARNINGS
1
This product is not a toy, please refrain from giving it to children as one.
2
Please do not shine directly into someone’s eyes with lights from our
product.
3
Please avoid placing the lens directly on top of a surface when the
lamp is on.
4
Slight warming is normal when the light is in use.
5
You must not disassemble the headlamp, especiallythe sealed parts.
6
Please wipe the headlamp dry immediately after it is placed in water
or put into contact with corrosive matters.
7
When the headlamp is not used for long period ,full charging
batteries every 3 months and discharge 20 minutes before storage.
8
FEREI has final rights to explain the instructions of the user manual.
DIAGRAM
USER MANUAL
HL
60
PRODUCT SPECIFICATIONS
MODEL NAME
HL60
LED
2
×
CREE
X
HP50
ANSI/FSC
HIGH POWER
CUSTOMIZED SETTING
POLICE
BLINKING
SLOW
BLINKING
QUICK
BLINKING
SOS
PERCENTAGE
BRIGHTNESS
100%
20%
30%
40%
50%
60%
70%
80%
90%
SAME AS SPOT SETTING
OUTPUT LUMEN
3500
700
1050
1400
1750
2100
2450
2800
3150
SAME AS SPOT SETTING
RUNTIME BASED IN 28º
C INDOOR SETTING
RANGE M
131
METERS
LIGHT INTENSITY
4320
CANDELA
WATERPROOF RATING
IP
×
4
2
M
DROPPROOF
DIMENSION
49
×
47.6
×
25 MM LIGHT BODY
BATTERY TYPE
WEIGHT
2
10
G BATTERIES NOT INCLUDED
ELASTIC HEADBAND
Rechargeable focusing
LED Headlamp
1
Do not use damaged batteries or batteries suspected to be damaged.
2
Do not used batteries with d/- terminals.
3
Please use certified 18650 lithium batteries.
4
Please avoid storing batteries inside headlamp for over 30 days.
5
Please do not disassemble any parts of headlamp nor attempt to “fix”
a malfunctioned headlamp.
6
It's better to use the same voltage battery for
2
pieces 18650 batteries
every time , do not mix old and new battery to used in headlamp .
ON/OFF SWITCH
HEAD
120 DEGREE
DIRECTION
ADJUSTER
BATTERY CASING
2
×
18650 BATTES
ELASTIC HEADBAND
COVER
DC
CONNECTOR
DC CABLE
ADJUSTMENT
DIRECTION
ADJUSTMENT
BUCKLE
2
×
18650 BATTERY
II
Ⅱ
>
2.5
NOTE: THE ABOVE PARAMETERS ARE TESTED BY USING
2
PCS 3400 MAH 18650 LIION BATTERIES
9
8.1
7.2
5.4
6
.
3
4.5
3.6
2.7
3
DC
CONNECTOR
