12
AVALLON.COM
®
©2021 Ferguson Enterprises, LLC V1.0-10132021
Installing the Shelves
Removing the Shelves
1. Open the door completely.
2. Line up the shelf notches with the rail posts on both the right and left sides.
3. Push the shelf down and then push it all the way inwards until the shelf fully rests inside of the unit
and you are able to close the door.
4. The shelf should glide smoothly back and forth. If it does not, you may need to remove it and start
over.
1. Open the door completely.
2. Remove all of the contents loaded on the shelf, if applicable.
3. Line up the shelf notches with the rail posts as indicated below. This will require you to hold on to
both rails as you move the shelf to line up the posts with the notches on both sides of the shelf.
4. Evenly life the shelf up and then pull the shelf out.
CAUTION:
To prevent damaging the door gasket, make sure to open the door fully before pulling the
shelves off their tracks.