Ferguson Enterprises Avallon AWC243TDZLH, Owner'S Manual

14

AVALLON.COM

®

©2021 Ferguson Enterprises, LLC V1.0-10132021

Internal Light

This refrigerator is equipped with top and side internal lights that can be set to a blue, white, or amber 

color. Because the unit comes with a glass door, the inside will be seen whether the door is open or 

closed. 

You can choose to display each color of light in two different modes: Automatic Light Mode and Constant 

Light Mode.

Holding the light button for three seconds will turn the lights completely off or back on. If you power the

lights off they will remain off, even when the door is open. Hold the light button for three seconds again 

to turn the lights back on.

Sabbath Mode

This refrigerator is programmed with a Sabbath Mode. In Sabbath Mode, the refrigerator will continue to 

cool and maintain temperature. However, the refrigerator will no longer respond to user interactions. All 

lights, display(s), and indicators are turned off, and all alarms are disabled. To enter Sabbath Mode, hold 

the Power button and press the Up button twice. The control panel will beep twice indicating that the 

refrigerator is in Sabbath Mode. To exit Sabbath Mode, perform the same action and the control panel 

will beep twice indicating that the refrigerator is no longer in Sabbath mode. The refrigerator will return 

to normal operation.

Automatic Light Mode:

The internal lights will illuminate each time the door is opened and fade off once the door is closed. This

feature is triggered by a sensor located on the front vent. This sensor allows the refrigerator to recognize

when the door is open or closed.

Constant Light Mode:

The internal lights will stay constantly illuminated whether the door is open or closed.

HAZARD:

If you turn the refrigerator off, please wait at least five (5) minutes before turning it back on.

NOTE:

We run test every unit that we produce in our factory. Because of this, your model may default to any 

of the above colors out of the box. Simply cycle through until you reach your desired internal light 

color.

NOTE: 

The refrigerator is equipped with a temperature memory function. If power is suddenly lost, the 

previously set temperature will be saved and the refrigerator will return to this setting once power is 

restored. Allow at least 24 hours for the setting temperature to be reached.