14
Headphone socket
1. A 3.5mm Headphone Socke t located on the rear of your radio is provided
for use with either headphones or an earpiece. Inserting a plug
automatically mutes the internal loudspeaker.
2. Line out socket-Red/White RCA Line out sockets located on the rear of
your radio is provided for connecting the audio signal to an external
amplifier. Inserting a line out audio cable will not mute the internal
loudspeaker. Set the volume control to minimum if desired.
General
•
Do not allow this radio to be exposed to water, steam or sand. Do not
leave your radio where excessive heat could cause damage such as in a
parked car where the heat from the sun can build up even though the
outside temperature may not seem too high. It is recommended that the
DAB band be used wherever possible as better results in terms of quality
and freedom from interference will usually be obtained than on the FM
band.
Specifications
•
Power Requirements
•
Mains AC 230 volts, 50Hz only
•
Frequency Coverage
•
FM 87.5 -108MHz
•
DAB 174.928 - 239.200MHz
Circuit Features
•
Loudspeaker 4 inch full range
•
Output Power 4 Watt
•
Headphone socket 3.5mm
•
Line out Red/White RCA connectors
•
Speaker output 3.5mm
Summary of Contents for FRG-R121D
Page 1: ...FRG R121D DAB FM...
