7
EN
sensory or mental capabilities, or lack of
experience and knowledge, unless they
have been given supervision or instruction
b)
Children being supervised not to play with
the appliance
c) Do not recharging non-rechargeable batteries!
d) During charging, batteries must be placed in
the well ventilated area!
Residual risks
Even when the power tool is used as
prescribed it is not possible to eliminate all
residual risk factors. The following hazards
may arise in connection with the power tool’s
construction and design:
a) Health defects resulting from vibration
emission if the power tool is being used
over longer period of time or not adequately
managed and properly maintained.
b) Injuries and damage to property to due to
broken accessories that are suddenly dashed.
Warning!
This power tool produces an
electromagnetic field during operation.
This field may under some circumstances
interfere with active or passive medical
implants. To reduce the risk of serious or
fatal injury, we recommend persons with
medical implants to consult their physician
and the medical implant manufacturer
before operating this power tool.
Power cord replacement
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
2. MACHINE INFORMATION
Intended use
The machine is intended for driving in and
loosening screws as well as for drilling in wood,
metal, ceramic and plastic and for impact drilling
in brick, brickwork and masonry.
Technical specifications
Model No
CDM1138
Charger
CDA1129
Input of charger
230-240V~ 50Hz
Max. 65W
Output of charger
21.5V DC 2.4A
Rechargeable battery pack
20V
Li-ion 2.0Ah
Battery charging time
1 hour
Chuck capacity
13 mm
Torque settings
25 + Drill mode + Impact
drill mode
No load speed
Position 1:
Position 2:
0-550 /min
0-2000 /min
No load impact rate
Position 1:
Position 2:
0-8250 /min
0-30000 /min
Sound pressure level L
PA
78.9 dB(A) K=3 dB(A)
Sound power level L
WA
89.9 dB(A) K=3 dB(A)
Hand-arm vibration a
h
(Impact drilling in concrete)
7.7 m/s
2
K=1.5 m/s
2
Hand-arm vibration a
h,D
(Drilling into metal)
<2.5 m/s
2
K=1.5 m/s
2
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardized test given in
EN62841; it may be used to compare one tool
with another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned.
• Using the tool for different applications, or with
different or poorly maintained accessories,
may significantly increase the exposure level.
•
The times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns.
Description
The numbers in the text refer to the diagrams on
pages 2 - 3
1. Machine
2. Battery
3. Battery unlock button
4. Battery LED indicators
5. Battery LED indicators button
6. Charger
7. Charger LED indicators
