Ferm
91
CE
KONFORMITETSERKLÆRING (DK)
Vi erklærer at under almindeligt ansvar, at dette produkt er i overenstemmelse med følgende
normer eller normative dokumenter:
EN1021-1, EN60204-1, EN60335-1
i overensstemmelse med direktiverne:
98/37/EØF, 73/23/EØF, 89/336/EØF, 87/404/EØF
fran 01-01-2006
ZWOLLE NL
W. Kamphof
Quality department
Det er vores hensigt til stadighed at forbedre vores produkter, og vi forbeholder os derfor til
enhver tid retten til at ændre produktspecifikationerne uden forudgående varsel.
Ferm BV • Lingenstraat 6 • 8028 PM Zwolle • Holland
GB
D
NL
F
E
P
I
S
FIN
N
DK
06
Ferm
•
Check that the tank is fully decompressed before connections with the tank are
unscrewed.
•
It is prohibited to make holes in, or welds to, or purposely to distort the compressed air
tank.
•
Do not perform any actions on the compressor without first having taken the plug out of
the plug socket.
•
Do not aim water jets or jets of flammable liquids at the compressor.
•
Do not place flammable objects near the compressor.
•
Switch the pressure regulator to the "0" position (OFF = uit) during dwell time.
•
Never aim the air jet at persons or animals (fig. 20).
•
Do not transport the compressor with the tank pressurised.
•
N.B.: some parts of the compressor such as the head and the feed-through pipes may
reach high temperatures. Do not touch these parts to avoid burns (fig. 12-13).
•
Transport the compressor by lifting it or by using the special grips or handles (fig. 5-6).
•
Children and animals should be kept far away from the area of operation of the machine.
•
If you use the compressor to spray paint:
a) Do not work in enclosed spaces or near naked flames.
b) Make sure that the environment in which you will be working has dedicated
ventilation.
c) Protect your nose and mouth with a dedicated mask (fig. 21).
•
Do not use the compressor when the electrical cable or the plug is damaged, and instruct
an authorised Support Service to replace them with an original part.
•
When the compressor is placed on a surface higher than the floor, it should be secured to
prevent it from falling down during operation.
•
Do not put objects or your hands in the protective covers to avoid physical damage and
damage to the compressor.
•
Do not use the compressor as a blunt instrument against persons, objects or animals in
order to prevent serious damage.
•
If the compressor is no longer in use, always take the plug out of the plug socket.
•
Always make sure that compressed-air hoses are used for compressed air and which are
characterised by a maximum pressure adjusted to that of the compressor. Do not try to
repair the hose if it is damaged.
Electrical safety
Earthing regulations
This compressor has to be earthed while in use in order to protect the operator against
electrical shocks. The compressor is provided with a two-core cable plus an earth. The
electrical connection has to be made by a qualified technician. We recommend never
disassembling the compressor and neither making any other connections into the pressure
regulator. Repairs should be carried out by authorised Support Services or by other qualified
centres.
Never forget that the earthing core is the green or the yellow/green wire. Never
connect this green wire to a terminal under load.
Before replacing the plug of the feed, make sure that the earth cable is connected. If in doubt,
please call in a qualified electrician and have the earthing checked.
GB
D
NL
F
E
P
I
S
FIN
N
DK
