7
EN
dust extraction (fig. C)
● Insert the dustbag (9) into the dustbag
connection (7).
● Turn the dustbag (9) clockwise until it locks
into place.
Hints for optimum use
● Clamp the workpiece.
● Firmly hold the machine with both hands.
● Switch on the machine.
● Place the sanding pad with sanding paper on
the workpiece.
● Slowly move the machine over the workpiece,
firmly pressing the sanding pad against the
workpiece.
● Do not apply too much pressure on the
machine. Let the machine do the work.
● Switch off the machine and wait for the
machine to come to a complete standstill
before putting the machine down.
ClEAnIng And mAInTEnAnCE
4
Before cleaning and maintenance,
always switch off the machine and
remove the mains plug from the mains.
● Regularly clean the housing with a soft cloth.
● Keep the ventilation slots free from dust and
dirt. If necessary, use a soft, moist cloth to
remove dust and dirt from the ventilation slots.
● Regularly clean the sanding pad to avoid
inaccuracies during use.
Replacing the sanding pad (fig. d)
In case of wear, the sanding pad must be replaced.
● If necessary, remove the sanding paper.
● Loosen the screws (10) from the sanding pad
(4).
● Remove the old sanding pad (4).
● Mount the new sanding pad (4).
● Tighten the screws (10) to the sanding pad (4).
WARRAnTy
Consult the enclosed warranty terms.
ENVIRONMENT
disposal
The product, the accessories, and the packaging
must be sorted for environmentally friendly
recycling.
Only for EC countries
Do not dispose of power tools into domestic
waste. According to the European Guideline
2012/19/EU for Waste Electrical and Electronic
Equipment and its implementation into national
right, power tools that are no longer usable must
be collected separately and disposed of in an
environmentally friendly way.
The product and the user manual are subject to
change. Specifications can be changed without
further notice.
Summary of Contents for ESM1010
