Ferm PSM1033, Original Instructions Manual

4

EN

DETAIL PALM SANDER 

PSM1033

Thank you for buying this Ferm product.
By doing so you now have an excellent product, 
delivered by one of Europe’s leading suppliers. 
All products delivered to you by Ferm are 
manufactured according to the highest standards 
of performance and safety. As part of our 
philosophy we also provide an excellent customer
service, backed by our comprehensive warranty. 
We hope you will enjoy using this product for 
many years to come.

1.  SAFETY INSTRUCTIONS

Read the enclosed safety warnings, 
the additional safety warnings and 
the instructions. 

Failure to follow the 

safety warnings and the instructions may result in 
electric shock, fire and/or serious injury. 

Save the 

safety warnings and the instructions for future 
reference.

The following symbols are used in the user  
manual or on the product:

Read the user manual.

 Denotes risk of personal injury, loss of life 
or damage to the tool in case of non-
observance of the instructions in this 
manual.

 Risk of electric shock.

 Wear safety goggles. 
Wear hearing protection.

Wear a dust mask.

 The product is in accordance with the 
applicable safety standards in the 
European directives.

GENERAL POWER TOOL SAFETY 

WARNINGS

WARNING! 
 Read all safety warnings and all 
instructions.

 Failure to follow the 

warnings and instructions may result in 
electric shock, fire and/or serious injury.

Save all warnings and instructions for future 
reference.

The term “power tool” in the warnings refers 
to your mains-operated (corded) power tool or 
battery-operated (cordless) power tool.

1)   Work area safety

a)

Keep work area clean and well lit.

 Cluttered 

or dark areas invite accidents.

b)

Do not operate power tools in explosive 
atmospheres, such as in the presence of 
flammable liquids, gases or dust.

 Power tools 

create sparks which may ignite the dust or fumes.

c)

 Keep children and bystanders away while 
operating a power tool.

 Distractions can 

cause you to lose control.

2)   Electrical  safety

a)  

Power tool plugs must match the outlet. 
Never modify the plug in any way. Do not use 
any adapter plugs with earthed (grounded) 
power tools. 

Unmodified plugs and matching 

outlets will reduce risk of electric shock.

b)  

Avoid body contact with earthed or 
grounded surfaces, such as pipes, 
radiators, ranges and refrigerators. 

There is 

an increased risk of electric shock if your body 
is earthed or grounded.

c)  

Do not expose power tools to rain or wet 
conditions. 

Water entering a power tool will 

increase the risk of electric shock.

d)  

Do not abuse the cord. Never use the cord 
for carrying, pulling or unplugging the power 
tool. Keep cord away from heat, oil, sharp 
edges or moving parts. 

Damaged or entangled 

cords increase the risk of electric shock.

e)  

When operating a power tool outdoors, use 
an extension cord suitable for outdoor use. 

Use of a cord suitable for outdoor use reduces 
the risk of electric shock.

f)  

If operating a power tool in a damp 
location is unavoidable, use a residual