Page 20
VDS iLoft Kit
VDS iLoft Kit
VDS iLoft Kit
VDS iLoft Kit
VDS iLoft Kit
VDS iLoft Kit
VDS iLoft Kit
VDS iLoft Kit
VDS iLoft Kit
VDS iLoft Kit
Monitor settings
To access
configuration mode
, press the button
down for two seconds
(the led will
blink once a second and a confirmation tone will be emitted).
On accessing configuration mode, the monitor will go into
volume settings mode
.
Image Settings (Brightness-Contrast and Colour)
In
image configuration mode
, the led blinks once every two seconds, indicating that the monitor
is in this mode.
The monitor has 4 pre-established settings with a specific level of brightness and
contrast and 4 colour levels.
On pressing the corresponding button you can select the brightness/contrast level or
colour setting.
When you come to the last option, an error tone is emitted and it returns to the first one.
- press the button to select brightness and contrast.
- press the button
to configure colour.
Set Call Bell Volume
- press the button to select a
high volume
or
- press the button
to select a
low volume
.
Call Tone and Call Cancellation (do not disturb mode)
- press the button to select the call tone. You will go through all the brightness-
contrast configurations it incorporates.
- press the button
to activate the call cancellation function (do not disturb mode);
The monitor led blinks on red to indicate «do not disturb» mode
To reactivate call functions, press the button .
(2 sec.)
: Volume Settings.
: Tone Selection.
: Image Settings.
Press the button
to move through the configuration options in order:
To adjust the different configuration options, while in the required option, follow these
steps:
