24
DUOX VEO XS AMBIANCE MONITOR
3. FUNCTIONING:
CALL VOLUME CONTROL (POTENTIOMETER)
While the device is in its idle state, you may slide the potentiometer to adjust the call volume
to a value between the minimum and the maximum (10 volume levels are available).
Notes:
- These adjustments will affect all melodies generated by the monitor, whether those
of the outdoor panel or the doorbell.
- To listen to the chosen option, you can either:
· make a call from the outdoor panel, or
· enter the melody-selection screen.
- If the Do Not Disturb mode is active, you may reactivate the call by sliding the po-
tentiometer to any position other than the minimum.
- As the volume adjustment can be made from the on-screen menu and from the
potentiometer, the latest change effected will prevail.
4. FUNCTIONING:
IMAGE DISPLAY
Function allowing you to see all images captured. The image capture function must be pre-se-
lected.
See chapter 4.5 User Menu - 4.5.3 Activation/Deactivation of images.
When a call is made from the outdoor panel,
(the image capture function must be pre-selected),
a
photo is automatically taken 5 seconds later and stored in the memory.
If you press the Erase option
you will
be taken to the delete confi rmation screen,
and by pressing the confi rmation icon
or
g
,
the selected picture
will be deleted.
The user can navigate through the saved
photos, even when the confi rmation win-
dow is active.
Select the icon
to display the various
photos taken.
The most recent image will be displayed
with the date, time and the photo number.
A contextual menu will appear:
: To select/view the photos stored.
: To clear images.
: To cancel and go to the previous screen.
Note: The maximum number of images that can be stored is 150, if a new image is stored
while the memory is full, the oldest image will be erased.
28 / 07 / 2017
08 / 15
011/028
28 / 07 / 2017
08 / 15
011/028
OK?
Summary of Contents for VEO XS DUOX
Page 50: ...26 DUOX VEO XS AMBIANCE MONITOR...