© Ferno / 234-1929-06 / July 2021
8
Model 35-ITA Incubator Transporter
3 - ABOUT THE TRANSPORTER
3.1 Description
The Ferno® Model 35-ITA Incubator Transporter (called the transporter
in this manual) is an emergency patient-handling device designed to
transport a patient in a ground-based ambulance.
The transporter is for professional use by a minimum of two trained
operators. It is designed for roll-in loading to help reduce the risk of
back injury to medical service personnel.
The transporter is designed for use with Ferno® fastening systems (not
included). It is compatible with the incubators listed on the product
information label affixed to the transporter. See “Safety and Instruction
Labels” on page 5.
A safety hook and users’ manual are included with purchase.
3.2 General Specifications
Specifications for the transporter are shown in the tables at right.
General specifications are rounded. Metric conversions are calculated
before rounding the Imperial measurement.
Ferno reserves the right to change specifications without notice. For
more information, contact Ferno Customer Relations or your Ferno
distributor (page 2).
Weight is without the incubator or optional features.
Loading Height is the distance from the ground to the bottom of the
loading wheel.
Bed Position is the distance from the ground to the patient surface,
measured at the casting in the center of the patient surface.
Specification
Imperial
Metric
Load Capacity
400 lb
181 kg
Weight
70 lb
32 kg
Max. Load Height
31 in
80 cm
Construction
Tubular aluminum
Wheel Bearings
Sealed/greaseless
Dimension
Imperial
Metric
Height
Position 8
40 in
100 cm
Position 7
36 in
91 cm
Position 6
32 in
81 cm
Position 5
27 in
70 cm
Position 4
23 in
59 cm
Position 3
19 in
47 cm
Position 2
14 in
35 cm
Position 1
9 in
23 cm
Width
Overall
23 in
58 cm
Length
Maximum
79 in
200 cm
Minimum
63 in
160 cm
Wheels
5 in
12.7 cm
WARNING
Improper use can cause injury. Use the transporter only
for the purpose described in this manual.
